
Add to Cart
Demo Case Of RFID Card Access Control Board And Two FR1200 , Built In Power
Features:
1. DEMO CASE with FULL function of one inBIO460
door controller and two FR1200, built-in power
supply, motion detector and alarm etc.;
2. 4 exit buttion, 4 door sensor, 4 relay output, 4
switch input; 1 SD card slot
Specifications:
Model | inBIO460 |
CPU | 32bit MIPS CPU |
RAM | 32M bits |
Flash Memory | 128M bits |
Fingerprint Capacity | 3000 |
Card Capacity | 50,000 |
Event Buffer | 200,000 |
Power/Current | DC 9.6V-14.4V, Rated Max 0.5A |
Wiegand Reader Port | 4nos. (26/34 bit Wiegand, 4/8bit Burs for PIN) |
RS485 Reader Port | 1no. Extended RS485 Port |
Communication | RS485, TCP/IP |
Baud Rate | 38,400bps(Recommended)/9600bps, 19,200bps(selectable) 57,600bps(selectable) |
Input Port | 12nos.(Exit Button#1, Door Sensor#1; Exit Button#2, Door Sensor#2; Exit Button#3, Door Sensor#3; Exit Button#4, Door Sensor#4, 4 Aux input) |
Output port | 4no.(4 FORM-C Relay Output, SPDT 5A@36VDC/8A@30VAC) |
| 4no.(4 Aux FORM-C Relay Output, SPDT 2A@30VDC) |
LED Indicator | LED indication for communication, power, status and valid card read |
Operating Temperature | 0°C ~ 55°C |
Operating Humidity | 10% to 80% relative humidity non-condensing |
Dimension(H*W*D)mm | 226mm*106mm*36mm(single board) |
| 400mm*330mm*90.5mm(metal board) |
Software | ZKAccess 3.5 |